产品特性铸钢 | 品牌RETZ瑞茨 |
型号进口立式止回阀 | 材质铸钢 |
连接形式法兰 | 加工定制是 |
结构形式立式 | 公称通径DN50~300mm |
形态立式 | 压力环境常压 |
标准美标 | 流动方向双向 |
驱动方式手动 | 工作温度常温 |
类型(通道位置)垂直 | 规格2”~ 12 |
产品特性铸钢 | 品牌RETZ瑞茨 |
型号进口立式止回阀 | 材质铸钢 |
连接形式法兰 | 加工定制是 |
结构形式立式 | 公称通径DN50~300mm |
形态立式 | 压力环境常压 |
标准美标 | 流动方向双向 |
驱动方式手动 | 工作温度常温 |
类型(通道位置)垂直 | 规格2”~ 12 |
品牌:RETZ瑞茨/美国,我们一直致力于流体控制领域的持续创新,始于2005……
150LB/PN16/10K Japanese standard check valve立式止回阀,垂直安装逆止阀阀瓣在流体压力作用下开启,流体从进口侧流向出口侧。当进口侧压力低于出口侧时,阀瓣在流体压差、本身重力等因素作用下自动关闭以防止流体倒流 Vertical check valve, vertically installed check valve disc opens under fluid pressure, and fluid flows from the inlet side to the outlet side. When the pressure on the inlet side is lower than that on the outlet side, the valve disc automatically closes under factors such as fluid pressure difference and its own gravity to prevent fluid backflow
进口立式止回阀 垂直安装逆止阀性能说明 Function description
立式止回阀(垂直安装逆止阀)由于采用弹簧支撑阀芯,故采用立式安装。正常处于关闭状态,由于管线中进口端介质的压力作用,而克服弹簧阻力使阀门开启。当进口端介质压力低于出口端时,弹簧将阀芯推向阀座而使阀门关闭,阻止介质逆流 RETZ The vertical installation of check valve (vertical check valve) is adopted because the valve core is supported by spring. The valve is normally closed, and the valve is opened by overcoming the spring resistance due to the pressure of the medium at the inlet end of the pipeline. When the medium pressure at the inlet end is lower than that at the outlet end, the spring pushes the valve core to the valve seat to close the valve and prevent the medium from flowing back
执行标准 Executive standards
设计规范Design Rating∶ API6D、BS1868、ASME B16.34、DIN3356、EN 13709、JIS B2071
结构长度Face to Face∶ASME B16.10、DIN3202, EN 558-1, DIN 3202, ISO 5752、JIS B2002
连接法兰Flanged Ends∶ASME B16.5、DIN2543-2546,EN 12267,EN 1092-1、JIS B2220
试验与检验Inspection & Testing∶API598、EN 12266, ISO 5208,DIN3230、JIS B2003
压力-温度Pressure- temperature:ASME B16.34
通径:2”~ 12” (DN50~300)
压力等级:150LB/PN16/10K,300LB/PN40/20K
适用温度:-40~425℃
阀体: 碳钢,不锈钢
阀瓣 Disc:304/316
填料 Packing:PTFE
阀杆 Stem:304/316
企业类型 | 有限责任公司(自然人投资或控股) | 统一社会信用代码 | 91310116MA1JEPF49N |
---|---|---|---|
成立日期 | 2021-04-26 | 法定代表人/负责人 | 林人杰 |
注册资本 | 100万(元) | 注册地址 | 上海市金山工业区亭卫公路6495弄168号5幢(时兴园区) |
营业期限 | 2021-04-26 至 无固定期限 | 登记机关 | 金山区市场监督管理局 |
经营范围 | 许可项目:货物进出口;技术进出口(依法须经批准的项目,经相关部门批准后方可开展经营活动,具体经营项目以相关部门批准文件或许可证件为准)一般项目:泵及真空设备销售;阀门和旋塞销售;气压动力机械及元件销售;液压动力机械及元件销售;轴承销售;卫生洁具销售;气体压缩机械销售;轴承、齿轮和传动部件销售;工业自动控制系统装置销售(除依法须经批准的项目外,凭营业执照依法自主开展经营活动)。 |