是否进口否 | 厂家(产地)中国 |
牌号 2000 FC30 | 用途级别中国 |
是否进口否 | 厂家(产地)中国 |
牌号 2000 FC30 | 用途级别中国 |
ESTAKEEP庐 1000 G is a low-viscosity, unreinforced polyether ether ketone for injection molding.
The semi-crystalline polymer features superior, thermal and chemical resistance. Parts made from VESTAKEEP庐 1000 G are of low flammability.
VESTAKEEP庐 1000 G can be processed by common injection machines for thermoplastics.
We recommend a melt temperature between 360掳C and 380掳C during the injection molding process. The mold temperature should be within a range of 160掳C to 200掳C, preferably 180掳C.
VESTAKEEP庐 1000 G is supplied as granules in 25 kg boxes with moisture-proof polyethylene liners.
For information about processing VESTAKEEP庐 1000 G, please follow the general recommendations in our brochure 鈥淰ESTAKEEP庐 PEEK Processing Guidelines鈥.
Pigmentation may affect values.
Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30掳C.
FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM OR VISIT OUR PRODUCT AT WWW.INDUSTRIAL.VESTAKEEP.COM
Mechanical properties ISO | dry | Unit | Test Standard |
Tensile Modulus | 3900 | MPa | ISO 527 |
Tensile Strength | 100 | MPa | ISO 527 |
Yield stress | 100 | MPa | ISO 527 |
Yield strain | 5.5 | % | ISO 527 |
Stress at break | 70 | MPa | ISO 527 |
Nominal strain at break, 蔚tB | 10 | % | ISO 527 |
Charpy impact strength, +23掳C | 60 | kJ/m虏 | ISO 179/1eU |
Type of failure | C | - | - |
Charpy impact strength, -30掳C | 60 | kJ/m虏 | ISO 179/1eU |
Type of failure | C | - | - |
Charpy notched impact strength, +23掳C | 5 | kJ/m虏 | ISO 179/1eA |
Type of failure | C | - | - |
Charpy notched impact strength, -30掳C | 5 | kJ/m虏 | ISO 179/1eA |
Type of failure | C | - | - |
Thermal properties | dry | Unit | Test Standard |
Melting temperature | 340 | 掳C | ISO 11357-1/-3 |
Glass transition temperature | 150 | 掳C | ISO 11357-1/-2 |
Temp. of deflection under load A, 1.80 MPa | 155 | 掳C | ISO 75-1/-2 |
Temp. of deflection under load B, 0.45 MPa | 205 | 掳C | ISO 75-1/-2 |
Vicat softening temperature A, 10 N, 50 K/h | 335 | 掳C | ISO 306 |
Vicat softening temperature B, 50 N, 50 K/h | 310 | 掳C | ISO 306 |
Coeff. of linear therm. expansion, 23掳C to 55 掳C, parallel | 60 | E-6/K | ISO 11359-1/-2 |
Melting Temperature | 340 | 掳C | ASTM D 3418 |
Physical properties | dry | Unit | Test Standard |
Water absorption | 0.5 | % | Sim. to ISO 62 |
Density | 1300 | kg/m鲁 | ISO 1183 |
Density | 1300 | kg/m鲁 | ASTM D 792 |
Burning Behav. | dry | Unit | Test Standard |
Burning behav. at 1.5 mm nom. thickn. | V-0 | class | IEC 60695-11-10 |
Thickness tested | 1.6 | mm | - |
Oxygen index | 38 | % | ISO 4589-1/-2 |
Glow Wire Flammability Index (GWFI) | 960 | 掳C | IEC 60695-2-12 |
Glow Wire Ignition Temperature (GWIT) | 800 | 掳C | IEC 60695-2-13 |
Limiting Oxygen Index | 38 | % | ASTM D 2863 |
Electrical properties | dry | Unit | Test Standard |
Relative permittivity, 1MHz | 2.8 | - | IEC 62631-2-1 |
Volume resistivity, 蟻V | >1E13 | Ohm*m | IEC 62631-3-1 |
Surface resistance, RSD | 1E14 | Ohm | IEC 62631-3-2 |
Electric strength, AC, S20/S20 | 19 | kV/mm | IEC 60243-1 |
Electric strength, AC, S20/P50 | 16 | kV/mm | Sim. to IEC 60243-1 |
CTI, test solution A, 50 drops value | 200 | - | IEC 60112 |
Rheological properties | dry | Unit | Test Standard |
Melt volume-flow rate, MVR | 150 | cm鲁/10min | ISO 1133 |
Temperature | 380 | 掳C | - |
Load | 5 | kg | - |
Molding shrinkage, parallel | 0.9 | % | ISO 294-4, 2577 |
Molding shrinkage, normal | 1.0 | % | ISO 294-4, 2577 |
企业类型 | 有限责任公司(自然人独资) | 统一社会信用代码 | 91441900MA4UNCL112 |
---|---|---|---|
成立日期 | 2016-04-07 | 法定代表人/负责人 | 吴双发 |
注册资本 | 50万(元) | 注册地址 | 东莞市樟木头镇先威大道85-1号塑胶商务中心二期9栋32号 |
营业期限 | 2016-04-07 至 无固定期限 | 登记机关 | 东莞市市场监督管理局 |
经营范围 | 销售:塑胶原料、其他化工产品(不含危险化学品)、高分子材料。(依法须经批准的项目,经相关部门批准后方可开展经营活动)〓 |