| 品牌加拿大Solinst | 是否进口否 |
| 产地加拿大 | 加工定制否 |
| 型号101P2 | 外形尺寸14mm*190mmmm |
扫一扫 微信联系
| 品牌加拿大Solinst | 是否进口否 |
| 产地加拿大 | 加工定制否 |
| 型号101P2 | 外形尺寸14mm*190mmmm |
| 产品名称：液体测量探头式水位计 品牌：Solinst 产地：加拿大 型号：101 P2
101 型水位计是便携式手动仪表的行业标准，用于测量井、钻孔、立管和水箱中的水深。它们坚固、易于使用，读数到 1/100 英尺或每毫米。 101 P2 型水位计具有易于维修的探头和热压印聚乙烯扁平胶带。  准确的：
可靠的：
长寿：
灵活的：
增强的激光标记胶带功能：
PVDF 扁平胶带每 1/100 英尺或每毫米激光打标一次；长度可达 5000 英尺 (1500 m)。新的扁平胶带通过在每个导体中使用 6 股镀铜不锈钢和 13 股不锈钢提高了抗拉强度和电气效率。P7 水位计探头经过精心设计，可浸入 1000 英尺（300 m）。探头的传感器在井、钻孔和级联水中提供始终如一的准确测量，位移几乎为零。 聚乙烯胶带 101 P2 型水位计使用聚乙烯胶带，卷起顺畅、保持柔韧性并笔直悬挂在井中。每毫米或 1/100 英尺的热压印标记允许准确的读数。3/8" (10 mm) 宽的胶带长度可达 1000 ft. (300 m)。 七股不锈钢导体，提供强度且无拉伸。它们使胶带非常容易维修和拼接。狗骨设计减少了对潮湿表面的粘附。
Solinst 101 型 P7 和 P2 水位计可提供如下所示的卷轴，标准长度如下： 小卷轴 * 100 英尺。 30米 * 200 英尺。 60米 * 300 英尺。 100米 中卷轴 * 500 英尺。 150米 * 750 英尺 250米 * 1000 英尺。 300米 大卷轴 1250 英尺 400米 1650 英尺 500米 2000 英尺 600米 *聚乙烯胶带仅提供这些长度 P2水位计探头 P2 水位计探头采用屏蔽设计，以减少或消除级联水中的错误读数。探头由带有氯丁橡胶热缩密封的不锈钢主体组成。它不适合浸没到任何显着深度。其简单的设计使其易于维修。
中文内容来自机器翻译，内容仅供参考，实际内容可参考原厂介绍或以合同为准。 英文原文： 101 P7 Submersible Probe measures water levels and total well depth More consistent measurements with sensor located at the tip of probe Solinst PVDF flat tape has increased tensile strength and electrical efficiency The Solinst 101 Water Level Meter with P7 Probe features an extremely durable, laser marked PVDF flat tape, with an enhanced dog bone design that is thicker, reducing adherence to the side of well casing. Enhanced Laser Marked Tape Features： Durable PVDF non-stretch tape Improved electrical properties Thicker dog bone design prevents clinging to sides of the well Permanently laser marked every 1/100 ft or each mm The PVDF flat tape is laser marked every 1/100 ft or each mm; lengths up to 5000 ft (1500 m). New flat tape has increased tensile strength and electrical efficiency by using 6 strands of copper coated stainless steel and 13 strands of stainless steel in each conductor. The P7 Water Level Meter Probe is engineered to allow submersion to 1000 ft. (300 m). Sensor at the tip of the probe provides consistently accurate measurements in wells, boreholes, and cascading water, with almost zero displacement. With a stand-alone design, convenient carrying handle, and sturdy probe holder, the standard reels are ergonomically designed for ease of use. They are robust and smooth running. The battery is housed in a convenient drawer in the front of the reel, allowing quick replacement. The reels are equipped with an on/off sensitivity switch, light, buzzer, battery test button, brake and a tape guide stored on the frame. Length Options： Solinst Model 101 P7 and P2 Water Level Meters are available on reels as shown below, in the following standard lengths: Small Reel * 100 ft. 30 m * 200 ft. 60 m * 300 ft. 100 m Medium Reel * 500 ft. 150 m * 750 ft. 250 m * 1000 ft. 300 m Large Reel 1250 ft. 400 m 1650 ft. 500 m 2000 ft. 600 m * Polyethylene tapes are only available in these lengths Water Level Meters Model 101 solinst water level meters measure depth of water in wells water wells boreholes depth of water depth of water in wells depth of water in boreholes depth of water in standpipes water level indicators water level indicator for piezometer image For measuring the depth to water in wells, boreholes, standpipes, and tanks, Model 101 Water Level Meters are the industry standard for portable hand operated meters. They are sturdy, easy to use and read accurately to 1/100 ft. or each millimeter. There are two versions to choose from. The Model 101 P7 Water Level Meter features a pressure-proof probe rated to 500 psi and laser marked PVDF flat tape. The Model 101 P2 Water Level Meter features an easy-to-repair probe and heat embossed polyethylene flat tape. Also available, are the less expensive Model 102 and 102M Coaxial Cable Water Level Meters for use in small diameter tubes, and the basic Model 101B Water Level Meter (see Model 102 and 101B Data Sheets). Features Accurate: Markings each 1/100 ft. or millimeter Traceable to national standards Sensitivity adjustable to conductivity Probes avoid false readings in cascading water Reliable: Permanent laser markings Non-stretch PVDF flat tape with stainless steel conductors Long Life: Rugged, corrosion proof components Strong, flexible tapes Easy to splice and repair Flexible: PVDF replacement tapes are interchangeable with other meters Laser Marked Flat Tape： Durable, non-stretch PVDF flat tape Accurately marked each mm or every 1/100 ft Tape splice option maintained Certified Traceable to National Standards PVDF Laser Marked Water Level Tape： The Model 101 P7 Water Level Meter uses extremely durable, PVDF flat tape, traceable to NIST and EU measurement standards. Each tape conductor contains 13 strands of stainless steel, and 6 strands of copper-coated steel, making the tape non-stretch and high in tensile strength and electrical efficiency. The tape has a thick dog bone design that prevents adherence to wet surfaces, and allows it to hang straight in application. The tape is also easy to splice. The 3/8" (10 mm) tapes come with permanent laser markings every 1/100 ft. or each millimeter, in lengths up to 5000 ft. (1500 m). LM2: Feet and tenths: with markings every 1/100 ft. LM3: Meters and centimeters: with markings every mm Operating Principles： Model 101 Water Level Meters use corrosion proof stainless steel probes attached to permanently marked flat tape, fitted on a well-balanced reel. They are powered by a standard 9 volt battery. The probes incorporate an insulating gap between electrodes. When contact is made with water, the circuit is completed, activating a loud buzzer and a light. The water level is then determined by taking a reading directly from the tape at the top of the well casing or borehole. A sensitivity control allows the buzzer to be turned off while in ascading water, and ensures a clear signal in both high and low conductivity conditions. Polyethylene Tape： The Model 101 P2 Water Level Meter uses high quality polyethylene tape that reels smoothly, remains flexible and hangs straight in the well. Heat embossed marking each millimeter or 1/100 ft. allow accurate readings. The 3/8" (10 mm) wide tapes come in lengths up to 1000 ft. (300 m). Seven stranded stainless steel conductors resist corrosion, provide strength and are non-stretch. They make the tape very easy to repair and splice. The dog-bone design reduces adherence to wet surfaces. M2 Feet and tenths: with markings every 1/100 ft. M3 Meters and centimeters: with markings every mm |
| 企业类型 | 有限责任公司(自然人投资或控股) | 统一社会信用代码 | 91130606MA07X7RT1G |
|---|---|---|---|
| 成立日期 | 2016-10-31 | 法定代表人/负责人 | 常超 |
| 注册资本 | 300万(元) | 注册地址 | 河北省保定市莲池区瑞兴路19号门脸 |
| 营业期限 | 2016-10-31 至 2046-10-30 | 登记机关 | 莲池区市场监督管理局 |
| 经营范围 | 物联网技术服务。自营和代理除国家组织统一联合经营的出口商品和国家实行核定公司经营的进口商品除外的其他货物的进出口业务。网络技术开发、技术咨询、技术转让、技术服务。计算机、软件及辅助设备、仪器仪表、机械设备、电子产品、电气设备、机电设备、环保安全设备及产品、电子元器件、照明器具、制冷设备、家用电器、电线电缆、一类医疗器械、二类医疗器械、三类医疗器械、五金产品、金属制品、塑料制品、橡胶制品、办公用品、文化用品、纸制品、通讯终端设备、消防设备、化工产品（不含危险化学品及易燃易爆品）、体育用品、玻璃制品、建材、家具、针制品、纺织品、服装、箱包、工艺礼品（文物除外）、日用百货批发、零售。（依法须经批准的项目，经相关部门批准后方可开展经营活动） | ||
