户外便携式光伏组件EL测试仪

天祥科技是太阳能光伏检测设备中国区授权销售代表

Inspection Capabilities
Micro-Crack Identification
Shunt Detection
Potential Induced Degradation (PID)
Finger Defects
Dead Cells
Broken Cells
Hotspots (partially)
Inhomogeneities and Impurities
Areas of Application
Direct Inspection of Solar Modules at the PV Power Plant
Inspection of Rooftop PV Installations
Incoming Goods Inspection
Failure Analysis of the PV Power Plant
Pre-delivery Inspection at the Manufacturer or Trading Company
Final Inspection before Installation
Documentation Purposes
Acceptance Tests
System&＃39;s Benefits
No need to demount the Solar Module (save time/cost)
Direct outdoor Measurements possible
Excellent Sensitivity and Image Quality
Quick Measurements (~2sec for c-Si Solar Modules)
No dark Box or Cover needed
Mobile Solution, no Transport Vehicles needed
Battery based System allows independent Operation
Successfully tested on various Solar Cell/ Module Types
Monocrystalline Silicon (mono-Si)
Polycrystalline Silicon (poly-Si)
Amorphous Silicon (a-Si)
Copper Indium Sulfide (CIS)
Copper Indium Gallium Selenide (CIGS)
Cadmium Telluride (CdTe)
Heterojunction with Intrinsic Thin Layer (HIT)

Battery-powered LumiSolarOutdoor System
The battery based version of the LumiSolarOutdoor system does not need any external power source. A powerful battery generates the electricity for both, camera and the solar
module being measured. It is possible to apply up to 100V and 7.5A to the module.

Specifications
Application Electroluminescence Inspection of Single Modules
directly on-site
EL Images 1024 × 1024 Pixel, 16 bit
Resolution 1.5mm/Pixel for Modules sized 1.7m × 1m
Image Output Data BMP, JPEG, raw data or TXT file
Measurement time ~2 sec for c-Si Solar Modules
Min. Distance Camera ? Module 0.25m
Typ. Distance Camera ? Module 3m-5m
Outdoor light conditions night sky, late twilight time
Module Power Supply from Battery max. 100V / 7.5A / 750W
Number of Measurements with single battery
charge
200-500 modules. Independent of the battery, the
system can be powered separately through a standard
100-240V~ socket
Dimensions of Trolley (Wheels included),
height × width × depth 75cm × 57cm × 38cm
Total System Weight 37kg
Schematic measurement set-up: