加工定制是 |
加工定制是 |
TFKF 空气分选机
TFKF AIR SEPARTION
产品简介:Product Introduction
物料通过振动给料机,均匀进入到Z型斗中,物料由于自由落体向下运动,在经过Z型斗的过程中,将物料充分打散,再经过离心风机将轻物质和泥土排出,重的物质由于重力的作用,在Z型斗中直接掉下,进入到后续的分选工序。
Material by vibrating feeder, evenly into the bucket, Z material due to free fall downward movement, after the process of Z type hopper will break the material thoroughly, repass centrifugal fan and the light and mud sucked up into the cyclone dust collector, through the cyclone speak light material and soil, heavy material due to the effect of gravity, in direct drop in the bucket, Z into the subsequent separation process.
适用范围 Scope Of Applica
适用于废钢尾料(ASR)。
Suitable for scrap steel tail stock (ASR).
产品用途 Product Use
将废钢尾料中的轻飘物和泥土分离出来,从而得到干净的物料,提高分选效率和分选纯度。
The light material and soil in the waste steel tailings are separated to obtain the clean material and improve the
separation efficiency and purity.
产品规格 Product Parameters
型号Model | 主电机功率Power(kw) | 卸料电机功率 kW | 振动电机功率 kW | 处理量 Output (m?/h) | 物料密度 density t/m? | 长 L | 宽 W | 高 H |
mm | mm | mm | ||||||
TFAS-15 | 15 | 2.2 | 2*0.75 | 3-5 | 0.7-0.8 | 2700 | 2600 | 5800 |
TFAS-22 | 22 | 5.5 | 2*0.75 | 5-8 | 0.7-0.8 | 3500 | 3300 | 5800 |
TFAS-37 | 37 | 5.5 | 2*1.5 | 10-14 | 0.7-0.8 | 5000 | 4500 | 5800 |
企业类型 | 有限责任公司(自然人投资或控股) | 统一社会信用代码 | 91210404MA0TQU0Y55 |
---|---|---|---|
成立日期 | 2016-12-27 | 法定代表人/负责人 | 李冬明 |
注册资本 | 3,000万(元) | 注册地址 | 辽宁省沈抚新区金枫街75-1号0301-N0050 |
营业期限 | 2016-12-27 至 2036-12-26 | 登记机关 | 辽宁省沈抚改革创新示范区管理委员会市场监督管理局 |
经营范围 | 许可项目:各类工程建设活动,货物进出口,技术进出口(依法须经批准的项目,经相关部门批准后方可开展经营活动,具体经营项目以审批结果为准) 一般项目:环境保护专用设备制造,环境保护专用设备销售,冶金专用设备制造,冶金专用设备销售,机械设备研发,机械设备销售,矿山机械销售,资源再生利用技术研发,环保咨询服务,资源循环利用服务技术咨询,技术服务、技术开发、技术咨询、技术交流、技术转让、技术推广,软件销售,软件开发,人工智能应用软件开发,网络与信息安全软件开发,人工智能基础软件开发,软件外包服务,非居住房地产租赁,住房租赁(除依法须经批准的项目外,凭营业执照依法自主开展经营活动) |