厂家(产地)美国液氮LNP | 牌号KL004A |
销售方式品牌经销 | 类型标准料 |
加工级别注塑级 | 特性级别标准级 |
用途级别通用级 |
厂家(产地)美国液氮LNP | 牌号KL004A |
销售方式品牌经销 | 类型标准料 |
加工级别注塑级 | 特性级别标准级 |
用途级别通用级 |
液氮Lubricomp KL004A (404-D)POM 液氮Lubricomp KL004A (404-D)POM原厂物性表: Physical Nominal Value Unit Test Method Processing Information 产品名称:POM 聚甲醛 厂家产地:SABIC美国液氮LNP 品牌型号:Lubricomp KL004A (404-D) 聚甲醛POM 美国液氮LNP Lubricomp KL004A 物性介绍:404-D又可以称为 KL004A,添加剂润滑剂聚四氟乙烯(PTFE) LNP* Lubricomp* KL004A SABIC Innovative Plastics - Acetal (POM) Homopolymer。 Product Description: Also known as: LNP* Lubricomp* Compound 404 D General: 如需或了解聚甲醛POM 液氮Lubricomp KL004A (404-D)POM详细物性、价格等相关资料,敬请来电咨询!
Specific Gravity 1.52 ASTM D792
Density 1.52 g/cm? ISO 1183
Molding Shrinkage - Flow (24 hr) 0.020 to 0.022 in/in ASTM D955
Molding Shrinkage - Across Flow (24 hr) 0.020 to 0.022 in/in ASTM D955
Molding Shrinkage ISO 294-4
Across Flow: 24 hr 2.0 to 2.2 %
Flow: 24 hr 2.0 to 2.2 %
Water Absorption (24 hr, 50% RH) 0.23 % ASTM D570
Water Absorption (Equilibrium, 73°F, 50% RH) 0.37 % ISO 62
Mechanical Nominal Value Unit Test Method
Tensile Modulus 2 370000 psi ASTM D638
Tensile Modulus 392000 psi ISO 527-2/1
Tensile Strength (Break) 8130 psi ASTM D638
Tensile Stress (Break) 7340 psi ISO 527-2
Tensile Elongation (Break) 11 % ASTM D638
Tensile Strain (Break) 9.4 % ISO 527-2
Flexural Modulus 380000 psi ASTM D790
Flexural Modulus 421000 psi ISO 178
Flexural Strength 12500 psi ASTM D790
Flexural Strength 12500 psi ISO 178
Coefficient of Friction ASTM D3702 Modified
vs. Itself - Dynamic 0.23
vs. Itself - Static 0.091
Wear Factor - Washer 12.0 10^-10 in^5-min/ft-lb-hr ASTM D3702 Modified
Impact Nominal Value Unit Test Method
Notched Izod Impact (73°F) 0.80 ft·lb/in ASTM D256
Notched Izod Impact Strength 3 (73°F) 2.1 ft·lb/in? ISO 180/1A
Unnotched Izod Impact (73°F) 11 ft·lb/in ASTM D4812
Unnotched Izod Impact Strength 3 (73°F) 19 ft·lb/in? ISO 180/1U
Instrumented Dart Impact (73°F, Energy at Peak Load) 63.7 in·lb ASTM D3763
Multi-Axial Instrumented Impact Energy 0.708 ft·lb ISO 6603-2
Thermal Nominal Value Unit Test Method
Deflection Temperature Under Load (264 psi, Unannealed, 0.126 in) 203 °F ASTM D648
Heat Deflection Temperature 4 (264 psi, Unannealed, 2.52 in Span) 208 °F ISO 75-2/Af
Injection Nominal Value Unit
Drying Temperature 180 °F
Drying Time 4.0 hr
Rear Temperature 350 to 370 °F
Middle Temperature 380 to 400 °F
Front Temperature 410 to 430 °F
Processing (Melt) Temp 390 to 420 °F
Mold Temperature 180 to 230 °F
Back Pressure 25.0 to 50.0 psi
Screw Speed 30 to 60 rpm
LNP Lubricomp* KL004A is a compound based on Acetal Homopolymer resin containing PTFE. Added features of this material include: Internally Lubricated. This grade was previously found under the LNP* Fulton* Tradename.
Product reorder name: KL004A
Material Status Commercial: Active
Availability North America
Additive PTFE Lubricant
Features Lubricated
Processing Method Injection Molding
企业类型 | 有限责任公司(自然人投资或控股) | 统一社会信用代码 | 914419005645865373 |
---|---|---|---|
成立日期 | 2010-11-19 | 法定代表人/负责人 | 何晓云 |
注册资本 | 50万(元) | 注册地址 | 广东省东莞市常平镇京九路230号 |
营业期限 | 2010-11-19 至 无固定期限 | 登记机关 | 东莞市市场监督管理局 |
经营范围 | 销售、网上销售:塑胶制品、塑胶辅料、塑胶专用模具、塑胶加工专用机械,塑胶原料、化工原料、塑胶助剂(不含危险化学品);货物进出口、技术进出口。(依法须经批准的项目,经相关部门批准后方可开展经营活动) |