产品特性测试 | 是否进口否 |
产地广东 | 加工定制是 |
品牌其他 | 型号面商 |
测试行程面商cpm | 测试速度面谈cpm |
类型其他 | 外形尺寸未定义mm |
重量37kg | 适用范围面议 |
装箱数1 | 电压220v |
装箱1 | 电机功率1500 |
行驶距离100 | 次数100000 |
产品特性测试 | 是否进口否 |
产地广东 | 加工定制是 |
品牌其他 | 型号面商 |
测试行程面商cpm | 测试速度面谈cpm |
类型其他 | 外形尺寸未定义mm |
重量37kg | 适用范围面议 |
装箱数1 | 电压220v |
装箱1 | 电机功率1500 |
行驶距离100 | 次数100000 |
BH-147轮椅车动态疲劳测试机---双辊疲劳测试机
一、本机概述: 轮椅车动态耐用性试验机依据制作,对轮椅车进行路况疲劳实验,目测轮椅车损坏程度。本机适用于使用者自己操纵和护理者操纵的手动轮椅车以及室内型和室外型电动轮椅车。电动轮椅车有三个或三个以上安装在两根平行传动的轴上的轮子,驱动轮不多于两个,速度不大于5km/h。本机采用plc触摸屏控制可设置行驶的速度,行驶距离。可设置双滚,到达设定的距离自动停机。1、 Overview of the machine: the dynamic durability testing machine for wheelchair is made according to the standard and the road fatigue test is carried out for the wheelchair and the damage degree of the wheelchair is visually inspected. This machine is suitable for manual wheelchair operated by users and nurses as well as indoor and outdoor electric wheelchairs. The electric wheelchair has three or more wheels installed on two parallel transmission shafts and the driving wheels are not more than two and the speed is not more than 5km / h. This machine uses PLC touch screen control can set the speed of travel travel distance. Double roll can be set to stop automatically when reaching the set distance
二、主要技術参数:
1.品牌plc+触摸屏程序控制;可设置行驶的速度,测试的转数等,
2.设备负载200kg;
3.采用台湾台达变频器+电机+减速箱各2套,***性能的稳定性,可单独控制。
4.可显示转数,速度,行走距离等。到达设定转数自动停机‘
5.速度1m/s_+0.1m/s可调。即0-4公里/小时
6.具有停电自动保存测试记录
7.障碍物高度6mm/9mm/12mm可换。
8.电源三相220v50hz。
9.电机功率:3kw
10.转轮直径: ∮250+-25mm.宽度800mm
11.机台配置斜坡平板,方便轮椅车的安装。
12轮子中心距调节距离: 350~900mm,采用丝杆导轨方便调节。
13.机台采用刚性材料焊接,表面喷塑防锈处理,***机台的稳定性和美观大方
14.长宽高约:2200*1200*2000
15.独立中央控制箱,方便操作,***电器的耐用性和性能。
1. Well known brand PLC + touch screen program control; can set the speed of driving the number of revolutions tested etc
2. The maximum load of the equipment is 200kg;
3. Two sets of Taiwan delta inverter + motor + reducer are adopted to ensure the stability of performance and can be controlled separately.
4. It can display revolution speed walking distance etc. Automatic stop at set speed‘
5. Speed 1m / S_ +0.1m/s adjustable. That is 0-4 km / h
6. It can save test records automatically after power failure
7. The height of obstacle is 6mm / 9mm / 12mm which can be replaced.
8. Three phase power supply 220 V 50 Hz.
9. Motor power: 3kw
10. Runner diameter: ∮ 250 + - 25mm width 800mm
11. The machine is equipped with slope plate to facilitate the installation of wheelchair.
12 wheel center distance adjustment distance: 350 ~ 900mm screw guide rail is used for easy adjustment.
13. The machine is welded with rigid materials and the surface is sprayed with anti rust treatment to ensure the stability and beauty of the machine
14. Length width and height: 2200 * 1200 * 2000
15. The independent central control box is convenient for operation and ensures the durability and safety of electrical appliances.
企业类型 | 有限责任公司(自然人独资) | 统一社会信用代码 | 914419000923979136 |
---|---|---|---|
成立日期 | 2014-02-26 | 法定代表人/负责人 | 江红云 |
注册资本 | 600万(元) | 注册地址 | 广东省东莞市樟木头镇樟洋一村路726号3栋102室 |
营业期限 | 2014-02-26 至 无固定期限 | 登记机关 | 东莞市市场监督管理局 |
经营范围 | 产销:检测仪器设备。(依法须经批准的项目,经相关部门批准后方可开展经营活动)〓 |