产品特性调压 | 品牌德国洛克 |
材质不锈钢 | 型号DE LOCKE |
连接形式焊接 | 适用介质液氧、液氮、液氩、液化天然气、液态二氧化碳、液态丙烷等 |
3C阀门类别工业 | 公称通径DN10~100 |
结构形式活塞式 | 压力环境常压 |
工作温度低温 | 标准美标 |
流动方向单向 | 驱动方式手动、气动、电动 |
零部件及配件阀体 | 形态柱塞式 |
类型(通道位置)二通式 | 规格中型 |
产品特性调压 | 品牌德国洛克 |
材质不锈钢 | 型号DE LOCKE |
连接形式焊接 | 适用介质液氧、液氮、液氩、液化天然气、液态二氧化碳、液态丙烷等 |
3C阀门类别工业 | 公称通径DN10~100 |
结构形式活塞式 | 压力环境常压 |
工作温度低温 | 标准美标 |
流动方向单向 | 驱动方式手动、气动、电动 |
零部件及配件阀体 | 形态柱塞式 |
类型(通道位置)二通式 | 规格中型 |
进口低温调压阀认准德国LOCKE洛克品牌
进口低温调压阀规格参数:
公称通径:DN10~DN100mm
公称压力:2.5Mpa、4.0Mpa
适用介质:液氧、液氮、液氩、液化天然气、液态二氧化碳、液态丙烷等
适用温度:-196℃~+80℃
调压范围:A型0.1MPa~0.3MPa;
B型0.2MPa~1.0MPa;
C型0.8MPa~1.6MPa
主要零部件材料:
阀体、阀盖、阀瓣、膜片:SS304、SS316
弹簧:60Si2MnA
Specifications and parameters of inlet low temperature pressure regulating valve:
Nominal diameter: dn10 ~ DN100mm
Nominal pressure: 2.5MPa, 4.0Mpa
Applicable media: liquid oxygen, liquid nitrogen, liquid argon, liquefied natural gas, liquid carbon dioxide, liquid propane, etc
Applicable temperature: - 196 ℃ ~ + 80 ℃
Pressure regulating range: type a 0.1MPa ~ 0.3MPa;
Type B: 0.2MPa ~ 1.0MPa;
Type C 0.8MPa ~ 1.6Mpa
Main parts and materials:
Valve body, bonnet, disc and diaphragm: SS304, SS316
Spring: 60Si2MnA
进口低温调压阀产品简介:
德国《DE LOCKE》洛克进口低温调压阀,也叫进口低温减压阀,进口低温压力调节阀,进口低温减压稳压阀,是在低温贮槽上用于将低温液体(液氧,液氮,液氩,液化天然气,LO2、LN2、LAR、LNG等)的压力保持在某一规定范围内,也就是将阀前进口的高压力减到并稳定在阀后出口所需要的压力值的阀门。
LOCKE进口低温调压阀经特殊的低温处理,将粗加工的零件置于冷却介质中数小时(2-6小时),以释放应力,确保材料的低温性能,***精加工尺寸,以防阀门在低温工况时,因温度变化造成变形而导致的泄漏。阀门的装配与普通阀门也不同,零件需经过严格的清洗,除去任何油污,以***使用性能。
Product introduction of imported low temperature pressure regulating valve:
German de lock imported low-temperature pressure regulating valve, also known as imported low-temperature pressure reducing valve, imported low-temperature pressure regulating valve and imported low-temperature pressure reducing and stabilizing valve, is used to keep the pressure of low-temperature liquid (liquid oxygen, liquid nitrogen, liquid argon, liquefied natural gas, LO2, LN2, LAR, LNG, etc.) within a specified range on the low-temperature storage tank, That is, the valve that reduces the high pressure at the front inlet of the valve to and stabilizes at the pressure required at the rear outlet of the valve.
Locke imported low-temperature pressure regulating valve is subject to special low-temperature treatment. The rough machined parts are placed in the cooling medium for several hours (2-6 hours) to release the stress, ensure the low-temperature performance of the material and ensure the finish machining size, so as to prevent the leakage caused by the deformation caused by temperature change when the valve is under low-temperature working conditions. The assembly of the valve is also different from the ordinary valve. The parts need to be strictly cleaned to remove any oil stain to ensure the service performance.
进口低温调压阀结构特点:
1、低温减压阀结构紧凑、体积小、重量轻。调节灵敏,稳定性好。
2、低温减压阀带可调装置,压力调节方便
3、低温减压阀阀门经低温深冷处理,可耐-196℃低温
4、低温减压阀垫片具有在常温下、低温状态及温度变化下能可靠密封性和复原性,密封性能好
企业类型 | 有限责任公司(自然人投资或控股) | 统一社会信用代码 | 91440402MA54DABX8Y |
---|---|---|---|
成立日期 | 2020-03-12 | 法定代表人/负责人 | 叶伟新 |
注册资本 | 1,268万(元) | 注册地址 | 珠海市前山港昌路598号2005商铺之一 |
营业期限 | 2020-03-12 至 无固定期限 | 登记机关 | 珠海市香洲区市场监督管理局 |
经营范围 | 流体控制科技领域内的技术开发、技术转让、技术咨询和技术服务,阀门、泵、仪器仪表、工业自动化控制设备、电气设备及配件的销售,从事货物及技术的进出口业务,以下限分支机构经营:阀门的生产、加工。(依法须经批准的项目,经相关部门批准后方可开展经营活动) |